page 1 vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com fact sheet helping customers innovate, improve & grow 1588 optimized oscillators industry need an all ip/ethernet network to increase bandwidth while reducing costs. ? the challenge communications applications require synchronization. ? delivering synchronization over ip networks is a challenge. ? ptp (precision timing protocol, or ieee-1588-2008) is a promising approach to this. ? traditional oscillator performance limits the efectiveness of ptp. ? the solution oscillators optimized for performance in ptp applications. ? the only oscillators specifcally designed and tested for use in ptp clock applications. ? in packet based timing, the prediction, monitoring and management of packet delay variation (pdv) is complex, challenging, potentially costly and still open to random network noise events. placing a predictable, stable and cost efective local clock at the client node can greatly improve the odds in deal - ing with network noise C increased client robustness allows a timing to be deployed across larger and less man - aged networks, reducing the overall cost of a timing solution. enhanced clock stability for the 1588 enabled network.
page 2 vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com fact sheet packet based timing technologies work on the two way exchange of timing information between a master clock and slave (or client) clock. the 1588 protocol works on the assumption that this two way exchange is symmetric (i.e. it expects that the packet delay from master to slave and slave to master is the same). how - ever, in the majority of wide area networks this is not the case and the phenomena of packet delay variation (pdv) introduces noise into the client clock. without severely limiting the scale of the network or introduc - ing complex management schemes, deriving accurate frequency and phase information from the packet network is a challenge. 1588 derived frequency reference challenges. timing requirements application time/phase synchronization accuracy cdma2000 (3gpp2 c.s0010-b, 3gpp2 c.s0002-c) +/- 3s with respect to utc* (during normal conditions) +/- 10s of utc (when the time sync reference is disconnected) w-cdma (tdd mode) (3gpp ts 25.402) 2.5s phase diference between base stations td-scdma (tdd mode) (3gpp tr 25.836) 3s phase diference between base stations lte (tdd) (3gpp ts 36.133) 3s time difference between base stations (small cell). 10s time diference between base stations (large cell) mbsfn (e.g. over lte) < +/- 1s with respect to a common time reference (continuous timescale) wimax (tdd mode) (ieee 802.16) depends on several parameters. ranges from +/-0.5s to +/-5s 1588 timing solutions there are a number of approaches described in the 1588 protocol that can be taken to delivering timing over a packet network. in broad terms these approached can be divided into the ordinary clock approach and the transparent clock approach. ordinary clock approach: in the ordinary clock approach the timing information is sent from the master clock to the slave clock without adjustment being made to the time stamp information by intervening nodes C routers in the path between the master and slave do not tell the slave anything about their behav - ior. the advantage of this approach is that the disruption to the existing network is minimal and service providers can deploy 1588 over an existing network C a possible disadvantage is that the slave needs to be robust in the presence of pdv. transparent clock approach: in the transparent clock approach the timing information is updated as it trav - els from the master to the slave C routers in the path between the master and slave can make adjustments to the packet to tell the slave about their behavior. the advantage of the transparent clock is that the deploy - ment can self-correct network disruptions far more easily C a disadvantage is that service providers are faced with the possibility of expensive forklift upgrades of existing networks. *see defnitions at end of document
page 3 vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com fact sheet disclaimer vectron international reserves the right to make changes to the product(s) and or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. for additional information, please contact europe: vectron international landstrasse, d-74924 neckarbischofsheim, germany tel: +49 (0) 7268.8010 fax: +49 (0) 7268.801281 usa: vectron international 267 lowell road hudson, nh 03051 tel: 1.888.328.7661 fax: 1.888.329.8328 asia: vectron international 1589 century avenue, the 19th floor chamtime international financial center shanghai, china tel: +86 21 6081.2888 fax: +86 21 6163.3598 vectron oscillators optimized for 1588 parameter ox-402 ox-222 ox-202 frequencies 10mhz, 12.8mhz, 20mhz 10mhz, 12.8mhz, 20mhz 10mhz, 12.8mhz, 20mhz package 13 x 20mm through-hole 22 x 25mm smt 25 x 25mm through-hole holdover stability <10ppb <10ppb <10ppb drift <1ppb <0.8 ppb <0.75ppb wander generation mtie 1 1s 0.2 ns 0.2 ns 0.2ns 10s 2.0 ns 2.0 ns 1.6ns 100s 10 ns 10 ns 12ns 1000s 40 ns 40 ns 34ns wander generation tdev 1 1s 0.015 ns 0.015 ns 0.001ns 10s 0.13 ns 0.13 ns 0.05ns 100s 1.5 ns 1.5 ns 0.8ns 1000s 5.0 ns 5.0 ns 3.5ns vectron oscillators for 1588 vectron matches the stability characteristics of its oscillators with the requirements of 1588 client clocks C this is done by design, but also through a system level verifcation of the oscillators suitability in the target application. choosing oscillators for 1588 applications is in many ways similar to selecting devices to sup - port sonet/sdh stratum level applications. however the role of pdv and any corresponding packet fltering used in a packet equipment clock (pec) needs to be considered also, since the system loop flter bandwidth is not necessarily pre-defned in the same way as sonet/sdh. notes - 1. wander generation per gr1244, system performance when locked through a 1mhz loop bandwidth. see typical data in datasheets. defnitions ptp - precision timing protocol - generic name for the protocol described in ieee standard 1588-2008 pdv - packet delay variation - a key source of time error in packet based timing mechanisms pec - packet equipment clock - described in g.8263 and a model of how a 1588 clock derives timing. utc - coordinated universal time, transmitted by gps holdover - holdover stability represents the maximum change in the clock frequency over time after the loss of all frequency references, and takes temperature as well as drift into account. drift - drift is a measure of how a clocks frequency accuracy (or ofset) changes with time. drift does not take temperature efects into account. mtie - the maximum time interval error, mtie, is a measure of the maximum time error of a clock over a particular time interval. tdev - tdev, the root of time allan variance tvar, is a measure of time stability
|
